Search
Dimensions
| A |
12.86 in 326.6 mm |
D3 |
6.50 in 165.1 mm |
G |
0.81 in 20.7 mm |
| B |
9.89 in 251.2 mm |
E1 |
2.97 in 75.4 mm |
K |
8.84 in 224.5 mm |
| C |
10.75 in 273.1 mm |
E2 |
0.62 in 15.7 mm |
L |
0.75 in 19 mm |
|
D1 |
3.50 in 88.9 mm |
E3 |
6.498 in 162.7 mm |
P |
2.69 in 55.4 mm |
| D2 |
0.64 in 16.3 mm |
F |
8.84 in 224.5 mm |
|
PTO 1200 Specifications
| U.S | S.I. | |
|---|---|---|
| *Rated Torque (Maximum) | 1200 Ft/Lbs | 1627 Nm |
| Maximum HP | 686 HP | 512 kW |
| *Maximum RPM | 3000 RPM | 3000 RPM |
| Rotation | Bi-rotation | Bi-rotation |
| **Maximum Actuation Pressure | 120, 200 or 320 psi | 8.3, 13.8 or 22.1 Bar |
| Min. Flow Rate Required | 1.5 GPM | 5.6 liters/min. |
| Operating Media at Clutch (Oil or Air) | Standard | Standard |
| Max. Back Pressure to Tank | 4 PSI | 0.3 bar |
| Maximum Fluid Temperature | 176° F | 80º C |
| Material - Output Hub | Alloy Steel | Alloy Steel |
| Housing | Aluminum | Aluminum |
| External Finish - Output Hub | Alloy Steel | Alloy Steel |
| Housing | Aluminum | Aluminum |
| Weight (Approx.) | 82 Lbs. | 37 Kg |
* Standard configuration. Modified standards available.
** Logan SAE PTO 1200 Series clutches are available in three (3) different actuation pressures. Refer to part number to determine model configuration.
PTO 1200 Series Shaft Options
Input Shaft/External Output Shaft/Internal*** |
|
|---|---|
| SAE 'D' & 'E' Spline 13T 8/16 DP | SAE ‘D’ & ‘E’ Spline 13T 8/16 DP |
| SAE 'F' Spline 15T 8/16 DP | SAE ‘F’ Spline 15T 8/16 DP |
| SAE 'F' Ø 1.750 x 7/16 Sq. Key | SAE ‘F’ Ø 1.750 x 7/16 Sq. Key |
*** Contact Logan Clutch for alternative pump shaft options. The output end of the clutch (female spline/bore) is not capable of supporting any side load. Use overhung load adapters.