Bell Housing PTO Snow Blowers

Heavy Duty Snow Blowers

Airport Snow Blowers

Clearing airport runways is a top priority during winter storms. This heavy-duty snow blower (pictured right), powered by a CAT C-18 Engine, and a Logan LC-314 Bell Housing PTO as part of the blower system – can cast 5,000 tons (4.535e6 Kg.) of snow per hour, over 200 ft. (60.96 meters). That’s approximately 1.4 tons (1,270 kg) per second.

Commercial Snow Blowers

This Airport 700 HP Snow Blower, pictured below, is equipped with a Logan LC-318 Bell Housing PTO and is capable of clearing a 120" wide path of snow, moving 6000 tons of snow per hour

Airport 700 HP Snow Blower, is equipped with a Logan LC-318 Bell Housing PTO and is capable of clearing a 120" wide path of snow, moving 6000 tons of snow per hour

Logan LC-314 Bell Housing PTO transmits 2,702 lb. ft. (3664Nm) of torque @ 200 psi the Logan LC-318 PTO and hydraulic manifold. Transmitts over 7000 lb ft of torque @200 psi

Municipal and Highway Loader Mount Snow Blowers

Close-up view of a typical single or two-stage Loader Mounted Snow Blower, which uses a Logan Bell PTO for the Direct drive. Since Logan Clutch engagement is smooth and positive, minimal break-in periods are required, enabling maximum torque transfer required to move heavy, wet snow up to a 175 ft. / 53 meter casting distance. Two-Stage 3-Ribbon Snow Blower, which typically uses either a CAT C13 (415HP) or Cummins QSL-9 (350HP) style engine connected to a Logan LC-311B ell Housing PTO enables up to 112 1D (2484.48 cm) cutting widths.

Municipal Loader using a Logan LC-314 Bell Housing PTO, which transmits 2702 lb.ft. (2664 Nm) of torque

Wheel Loader Retrofitted a self-adjusting Logan Bell PTO, originally used a mechanical, lever activated over center PTO Wheel Loader equipped with a Logan Bell PTO