Logan Front Mount PTOs for Scania D12M and D16M Diesel Engines and Generator Sets

Scania D16M / 15.6 Litre Engine  with Logan Front Mount PTO

Features

 

Partial view of Logan Front Mount PTO Kit.

Advantages

 

600 lb. ft. / 813 Nm of Torque @ 140 psi / 9.7 bar
342 HP / 255 kW Maximum  HP
Maximum engagement speed is 1800 RPM with Logan SOFTSTART feature

 

Air/Fluid Actuated PTO SPF 600 Specifications

Air/Fluid Actuated PTO SPF 600 Specification

Note: The torque capacity of the clutch is directly proportional to the operating pressure. Maintaining the lowest pressure possible to transfer the desired torque will enable the clutch to run cooler and extend the life span of the internal bearings. The output end of the clutch (female spline/bore) is not capable of supporting any side load. Use overhung load adapters. Drive shaft alignment must be within 3 degrees. Maximum installation angle 7°. Consult factory for more details.

 

Questions?
Consult Logan for applications that require lower actuation pressure or increased torque and rpm requirements.
 

 

 

You are saving trees by using the eco-friendly print page provided by Virteom! Thanks!
Free Subscription!

Join our list and receive our email newsletter.

Powered by Virteom
Virteom Logo