Search
Dimensions
| SAE FACE | C | B2 | 5 in 127.0 mm |
E | 11.98 in 304.2 mm |
J2 | 0.625-11 in 15.9 mm |
| SAE SPLINE | C/14T/12-24DP Input & Output |
C1 | 0.5 in 12.7 mm |
F | 1.39 in 35.2 mm |
K | 7.28 in 185.0 mm |
| A1 | 2.19 in 55.5 mm |
C2 | 0.53 in 13.5 mm |
G | 1.99 in 50.5 mm |
L1 | 0.562 in 14.3 mm |
| A2 | 2.25 in 57.2 mm |
D1 | 0.76 in 19.4 mm |
H | 7.125 in 181.0 mm |
L2 | 0.688 in 17.5 mm |
| B1 | 5 in 127.0 mm |
D2 | 0.78 in 19.8 mm |
J1 | 0.50-13 in 12.7 mm |
M | 4.508 in 114.5 mm |
The torque capacity of the clutch is directly proportional to the operating pressure. Maintaining the lowest pressure possible to transfer the desired torque will enable the clutch to run cooler and extend the life span of the internal bearings.
PTO 500 Series Static Torque Ratings
PSI (Ratings in ft. lbs.)
| Model | 80 | 90 | 100 | 110 | 120 |
| 500 | 536 | 622 | 708 | 794 | 880 |
PTO 500 Series Static Torque Ratings
BAR (Ratings in Nm)sss
| Model | 5.5 | 6.2 | 6.9 | 7.5 | 8.3 |
| 500 | 727 | 843 | 960 | 1077 | 1193 |
PTO 500 Series Shaft Options
Input Shaft/External Output Shaft/Internal |
|
|---|---|
|
*SAE C 14T/12-24 D.P. |
*SAE C 14T/12-24 D.P. |
|
6B Parallel Side Spline |
SAE B 13T/16-32 D.P. |
|
1.250 O.D. with .312 Keyway |
.1.250 I.D. with .312 Keyway |
|
1.250 O.D. with .312 Keyway |
SAE C 14T/12-24 D.P. |
|
SAE C 14T/12-24 D.P. |
.1.250 I.D. with .312 Keyway |
|
SAE C 14T/12-24 D.P. External |
SAE C 14T/12-24 D.P. External |
PTO 500 Specifications
| U.S | S.I. | |
|---|---|---|
| *Rated Torque (Maximum) | 500 Ft/Lbs | 675 Nm |
| Maximum HP | 286 HP | 213 Kw |
| *Maximum RPM | 3000 RPM | 3000 RPM |
| Rotation | Bi-rotation | Bi-rotation |
| Manual Engagement | Standard | Standard |
| Maximum Actuation Pressure | 120 psi | 8 Bar |
| Minimum Actuation Pressure | 80 psi | 6 Bar |
| Displacement (Maximum) | 14 in3 | 230 cm3 |
| Minimum Flow Rate Required | 6 GPM | 22 Liters/min |
| Operating Media at Clutch (Oil or Air) | Standard | Standard |
| Maximum Back Pressure to Tank | 7 psi | 0.5 Bar |
| Maximum Fluid Temperature 180 F 82 C | 180 F | 82 C |
| Material - Flanges | Aluminum | Aluminum |
| Shaft | Alloy Steel | Alloy Steel |
| Housing | Aluminum | Aluminum |
| External Finish - Flanges | Anodized | Anodized |
| Shaft | Alloy Steel | Alloy Steel |
| Housing | Anodized | Anodized |
| Maximum Overhung Load at Bearing (Bracket Supported Female End) |
200 Lbs | 90.8 Kg. |
| Weight (Approximate) | 46 Lbs | 20.9 Kg.. |
| Wet input seal available (Optional) | 30 psi | 2 bar |
*Consult Logan for applications that require lower actuation pressure or increased torque and rpm requirements.
** Hi-Capacity version available. Consult Logan for torque, RPM and envelope dimensions.