Search
Simplify Screw Machine Operation Without Going Overboard or Over Budget
U.S. Pat# 6,148,976
Cycle time on a conventional Model B can vary 3-4 tenths of a second or more due to mechanical clutches, linkages, levers, and band brakes that are out of adjustment.
For example, if cycle time on a job layout is 2.0 seconds, you may be losing 10% or more in productivity, or almost
200 parts per hour - with only a 2 tenths variation in cycle time! Logan Hi-Lo Retrokits and controls eliminate these challenges - helping you realize significant productivity gains - utilizing the same operator, machine and floor space.
"Go To" Stock Load Positioning
Our power applied brake feature stops your Model B in the correct position to load bars - "jogging" the machine into bar load position during stock up is eliminated - reducing manual load time as much as 50%!
- Stops machine within 1-degree of manual bar load position
- Prevents machine coasting - Minimizes cut-off tool breakage
Ideal for Bar Loaders Too!
- Accurately Positions your Model B in the "Bar Load Window" to accept bar stock from Iemca, Cucchi, Tri-Vision loaders, and more.
Hi-Lo Retrokit® Control Features:
The CS 2001XT is manufactured specifically for all brands of screw machines, making it easy for operators to learn and to teach. Factory or field retrofitted, the XT offers tremendous flexibility during machine set-up and simplifies machine operation.
*$150,000.00+ Servo B vs $14,500.00 Logan Retrokit
|
Standard Features |
Servo |
Logan |
|
Machine LockupTM Detection |
Yes |
Yes |
|
“Go to” Stock Load Position |
Yes |
Yes |
|
Programmable High Speed Shift Point |
Yes |
Yes |
|
Programmable Low Speed Shift Point |
Yes |
Yes |
|
Programmable Tool Counters |
Yes |
Yes |
|
Programmable Job Counter |
Yes |
Yes |
|
Auxiliary Programmable Outputs |
Yes |
Yes |
|
High Point Stop / Low Point Stop |
Yes |
Yes |
|
Low Point Stop |
Yes |
Yes |
|
Low Speed Lock |
Yes |
Yes |
|
Cycle Time Display |
Yes |
Yes |
|
Revisable Index and Feed Out Counter |
Yes |
Yes |
|
Stock Depletion Sensor Input |
Yes |
Yes |
|
Machine Start Interrupts |
Yes |
Yes |
|
Machine Position Display in Degrees or Hundredths |
No |
Yes! |
|
Variable Spindle Speeds |
Yes |
No |
* Based on published Davenport prices. Call Logan today for more information.